5 open source boards using the C55136
Real designs built with the C55136, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Poly corne split42 right
thpoll83
182 × 129 mm498 parts4LCERN-OHL-W-2.0406
ESP32Hub
cUDGk
60 × 48 mm55 parts2LCustom license0
RP2040/RP2350Poly kybd split72 left
182 × 129 mm498 parts4LCERN-OHL-W-2.0406
RP2040/RP2350Poly kybd split72 right
182 × 129 mm498 parts4LCERN-OHL-W-2.0406
RP2040/RP2350Poly corne split42 left
134.4 × 98.5 mm298 parts4LCERN-OHL-W-2.0406
The C55136 in open source designs
The gallery holds 5 open source boards using the C55136 from 2 GitHub repositories; a typical one measures about 182 × 129 mm and carries around 498 components.
80% use four copper layers or more, and 80% carry an open source license.
The most starred is Poly kybd split72 left by thpoll83.
Microcontrollers on boards using the C55136
What boards using the C55136 are built for
C55136: common questions
Where can I find a C55136 reference design?
Each of the 5 boards on this page is a real design using the C55136. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C55136 use?
Most are built on RP2040/RP2350 (4) and ESP32 (1).
How big is a typical board using the C55136?
The median is 182 × 129 mm, and 20% are two-layer designs.
What is the most popular open source board using the C55136?
By GitHub stars, Poly kybd split72 left by thpoll83, with 406 stars.
Can I simulate one of these boards using the C55136 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.