6 open source boards using the C701342

Real designs built with the C701342, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the C701342

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the C701342 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 2.2 µF).
  • The IO2 pin is left unconnected on 5 of 5 designs.
  • The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF).
  • The EN pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ.
GNDpin 1, 15, 38, 39Connected to: GND 100%
VDDpin 2Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 100 nF (2), 4.7 µF (1), 10 µF (1)
ENpin 3Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (2), 2.2 µF (1), 10 nF (1)
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
SENSOR_VPpin 4Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 100 kΩ (1)
SENSOR_VNpin 5Connected to: Not connected 80% · a signal 20%
IO34pin 6Connected to: Not connected 60% · 3.3V 20% · a signal 20%
IO35pin 7Connected to: Not connected 60% · 5V 20% · a signal 20%
IO27pin 12Connected to: A connector 40% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
IO14pin 13Connected to: A connector 40% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
IO12pin 14Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 2 kΩ (1)
IO13pin 16Connected to: A connector 40% · not connected 40%
  • Series resistor on 40% · 2 kΩ (1)
NCpin 17, 18, 19, 20, 21, 22, 32Connected to: Not connected 100%
IO15pin 23Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 2 kΩ (1), 1 kΩ (1)
IO2pin 24Connected to: Not connected 100%
IO0pin 25Connected to: Signal 100%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
IO16pin 27Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 1.2 kΩ (1), 470 Ω (1)
IO17pin 28Connected to: Not connected 60% · a signal 40%
IO5pin 29Connected to: Not connected 60% · a signal 40%
IO21pin 33Connected to: A connector 40%
  • Pull-up to 3.3V on 80% · 10 kΩ (2), 1.5 kΩ (1), 4.7 kΩ (1)
IO22pin 36Connected to: A connector 40%
  • Pull-up to 3.3V on 80% · 10 kΩ (2), 1.5 kΩ (1), 4.7 kΩ (1)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RobotDriver by BerkeleyHCI, Sonar by QuickRecon, Lueftermonster by Nebukadneza and Luma by notaroomba.

The C701342 in open source designs

The gallery holds 6 open source boards using the C701342 from 6 GitHub repositories; a typical one measures about 84 × 60 mm and carries around 76 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is RobotDriver by BerkeleyHCI.

Microcontrollers on boards using the C701342

C701342: common questions

Where can I find a C701342 reference design?

Each of the 6 boards on this page is a real design using the C701342. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the C701342 EN pin connected?

The EN pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the C701342.

How is the C701342 IO2 pin connected?

The IO2 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the C701342.

What decoupling capacitors do designs use on the C701342 VDD pin?

The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the C701342.

Which microcontrollers do boards using the C701342 use?

Most are built on ESP32 (6).

How big is a typical board using the C701342?

The median is 84 × 60 mm, and 100% are two-layer designs.

What is the most popular open source board using the C701342?

By GitHub stars, RobotDriver by BerkeleyHCI, with 91 stars.

Can I simulate one of these boards using the C701342 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part