2 open source boards using the CD74HC243M96
Real designs built with the CD74HC243M96, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
I8080-sbc
quasiengineer
100 × 100 mm111 parts2LNo license13AVR/Arduino
Usbjoystick d12 a4 r1 rev2.0
nealpalmer
43 × 58 mm63 parts2LGPL-3.00
The CD74HC243M96 in open source designs
The gallery holds 2 open source boards using the CD74HC243M96 from 2 GitHub repositories; a typical one measures about 71.5 × 79 mm and carries around 87 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is I8080-sbc by quasiengineer.
Microcontrollers on boards using the CD74HC243M96
CD74HC243M96: common questions
Where can I find a CD74HC243M96 reference design?
Each of the 2 boards on this page is a real design using the CD74HC243M96. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CD74HC243M96 use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the CD74HC243M96?
The median is 71.5 × 79 mm, and 100% are two-layer designs.
What is the most popular open source board using the CD74HC243M96?
By GitHub stars, I8080-sbc by quasiengineer, with 13 stars.
Can I simulate one of these boards using the CD74HC243M96 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.