7 open source boards using the CD74HC4067M96
Real designs built with the CD74HC4067M96, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
QLAMP-main
hisashin
142 × 58 mm143 parts2LGPL-3.024ESP32
Mission mimosa
zademahi238
55 × 55 mm31 parts2LNo license2RP2040/RP2350
Nbfm1-open bci
C31N
190 × 110 mm640 parts4LNo license0ESP32
Micromouse
MukeshSethy
100 × 120 mm177 parts4LNo license0ESP32
BaseLine
smvumbaco
108.2 × 131.6 mm108 parts4LNo license0QPCR-photosensing
hisashin
93.1 × 86.1 mm62 parts2LGPL-3.047STM32
MC SunSensor
queens-satellite-team
90.2 × 95.9 mm104 parts4LNo license1
How designs wire the CD74HC4067M96
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the CD74HC4067M96 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a capacitor to GND on 4 of 7 designs, most often 100 nF (then 4.7 µF).
- The COM_I/O pin has a series resistor on 3 of 7 designs, most often 10 MΩ.
- The I7 pin has a series resistor on 3 of 7 designs, most often 5.76 kΩ (then 47 kΩ).
- The I6 pin has a series resistor on 3 of 7 designs, most often 5.76 kΩ (then 47 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| COM_I/Opin 1 | Connected to: The microcontroller 43%, a connector 29% |
|
| I7pin 2 | Connected to: Signal 86% |
|
| I6pin 3 | Connected to: Signal 86% |
|
| I5pin 4 | Connected to: Signal 86% |
|
| I4pin 5 | Connected to: Signal 86% |
|
| I3pin 6 | Connected to: A connector 29% |
|
| I2pin 7 | Connected to: A connector 29% |
|
| I1pin 8 | Connected to: A connector 29% |
|
| I0pin 9 | Connected to: A connector 29% |
|
| GNDpin 12 | Connected to: GND 71% · -1V 29% | — |
| I9pin 22 | Connected to: Signal 86% |
|
| VCCpin 24 | Connected to: CJT1117-3.3 29% · 5V 43% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include QPCR-photosensing by hisashin, QLAMP-main by hisashin, Mission mimosa by zademahi238 and MC SunSensorPCB by queens-satellite-team.
The CD74HC4067M96 in open source designs
The gallery holds 7 open source boards using the CD74HC4067M96 from 7 GitHub repositories; a typical one measures about 100 × 95.9 mm and carries around 108 components.
57% use four copper layers or more, and 29% carry an open source license.
The most starred is QPCR-photosensing by hisashin.
Parts used alongside the CD74HC4067M96
Microcontrollers on boards using the CD74HC4067M96
What boards using the CD74HC4067M96 are built for
CD74HC4067M96: common questions
Where can I find a CD74HC4067M96 reference design?
Each of the 7 boards on this page is a real design using the CD74HC4067M96. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CD74HC4067M96 VCC pin connected?
The VCC pin has a capacitor to GND on 4 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the CD74HC4067M96.
What resistor goes on the CD74HC4067M96 COM_I/O pin?
The COM_I/O pin has a series resistor on 3 of 7 designs, most often 10 MΩ. Counted from the KiCad layouts of 7 open source designs using the CD74HC4067M96.
What resistor goes on the CD74HC4067M96 I7 pin?
The I7 pin has a series resistor on 3 of 7 designs, most often 5.76 kΩ (then 47 kΩ). Counted from the KiCad layouts of 7 open source designs using the CD74HC4067M96.
What parts are used alongside the CD74HC4067M96?
The COM1305-0.032768-EXT-T-TR, LMP7717MF_NOPB, SN74LVC1GU04DCKR and TS12A12511DCNR appear in the most repositories here.
Which microcontrollers do boards using the CD74HC4067M96 use?
Most are built on ESP32 (4), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the CD74HC4067M96?
The median is 100 × 95.9 mm, and 43% are two-layer designs.
What is the most popular open source board using the CD74HC4067M96?
By GitHub stars, QPCR-photosensing by hisashin, with 47 stars.
Can I simulate one of these boards using the CD74HC4067M96 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.