2 open source boards using the CON_UGM128032A6B01

Real designs built with the CON_UGM128032A6B01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The CON_UGM128032A6B01 in open source designs

The gallery holds 2 open source boards using the CON_UGM128032A6B01 from 2 GitHub repositories; a typical one measures about 337.4 × 71.3 mm and carries around 243 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Mooltipass mini by limpkin.

Parts used alongside the CON_UGM128032A6B01

Microcontrollers on boards using the CON_UGM128032A6B01

CON_UGM128032A6B01: common questions

Where can I find a CON_UGM128032A6B01 reference design?

Each of the 2 boards on this page is a real design using the CON_UGM128032A6B01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the CON_UGM128032A6B01?

The AT45DB011D, ATMEGA32U4_QFN, IP4234CZ6,125 and ST662ACD appear in the most repositories here.

Which microcontrollers do boards using the CON_UGM128032A6B01 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the CON_UGM128032A6B01?

The median is 337.4 × 71.3 mm, and 50% are two-layer designs.

What is the most popular open source board using the CON_UGM128032A6B01?

By GitHub stars, Mooltipass mini by limpkin, with 528 stars.

Can I simulate one of these boards using the CON_UGM128032A6B01 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part