4 open source boards using the ST662ACD
Real designs built with the ST662ACD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Mooltipass
limpkin
60 × 63.3 mm66 parts4LNo license528AVR/Arduino
Mini mass prog bench
limpkin
600 × 110 mm420 parts4LMIT10AVR/Arduino
Mooltipass mini
limpkin
74.9 × 32.5 mm65 parts2LNo license528AVR/Arduino
Password
limpkin
52.1 × 30.1 mm54 parts2LNo license528
The ST662ACD in open source designs
The gallery holds 4 open source boards using the ST662ACD from 2 GitHub repositories; a typical one measures about 67.4 × 47.9 mm and carries around 66 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Mooltipass by limpkin.
Parts used alongside the ST662ACD
Microcontrollers on boards using the ST662ACD
ST662ACD: common questions
Where can I find a ST662ACD reference design?
Each of the 4 boards on this page is a real design using the ST662ACD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ST662ACD?
The AT45DB011D, ATMEGA32U4_QFN, CON_UGM128032A6B01 and IP4234CZ6,125 appear in the most repositories here.
Which microcontrollers do boards using the ST662ACD use?
Most are built on AVR/Arduino (4).
How big is a typical board using the ST662ACD?
The median is 67.4 × 47.9 mm, and 50% are two-layer designs.
What is the most popular open source board using the ST662ACD?
By GitHub stars, Mooltipass by limpkin, with 528 stars.
Can I simulate one of these boards using the ST662ACD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.