2 open source boards using the DIP-8 Socket

Real designs built with the DIP-8 Socket, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The DIP-8 Socket in open source designs

The gallery holds 2 open source boards using the DIP-8 Socket from 1 GitHub repository; a typical one measures about 257 × 117.5 mm and carries around 132 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Teacup carrier by thingino.

Microcontrollers on boards using the DIP-8 Socket

ESP32 2

What boards using the DIP-8 Socket are built for

DIP-8 Socket: common questions

Where can I find a DIP-8 Socket reference design?

Each of the 2 boards on this page is a real design using the DIP-8 Socket. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the DIP-8 Socket use?

Most are built on ESP32 (2).

How big is a typical board using the DIP-8 Socket?

The median is 257 × 117.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the DIP-8 Socket?

By GitHub stars, Teacup carrier by thingino, with 1 stars.

Can I simulate one of these boards using the DIP-8 Socket before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.