3 open source boards using the DNI
Real designs built with the DNI, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Open covg daq
lucask07
157.8 × 95.2 mm596 parts6LGPL-3.09Medusa rs422 rx
sharebrained
71.5 × 42 mm46 parts2LGPL-2.05RP2040/RP2350
FC Board v3
proveskit
100 × 100 mm73 parts4LCERN-OHL-W-2.06
The DNI in open source designs
The gallery holds 3 open source boards using the DNI from 3 GitHub repositories; a typical one measures about 100 × 95.2 mm and carries around 73 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Open covg daq pcb by lucask07.
Microcontrollers on boards using the DNI
What boards using the DNI are built for
DNI: common questions
Where can I find a DNI reference design?
Each of the 3 boards on this page is a real design using the DNI. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DNI use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the DNI?
The median is 100 × 95.2 mm, and 33% are two-layer designs.
What is the most popular open source board using the DNI?
By GitHub stars, Open covg daq pcb by lucask07, with 9 stars.
Can I simulate one of these boards using the DNI before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.