6 open source boards using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER

Real designs built with the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER connects to, and the resistors, capacitors and other passives placed on it.

  • The FLT pin is left unconnected on 4 of 5 designs.
  • The RST pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
  • The SLP pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
  • The VMOT pin has a decoupling capacitor on 2 of 5 designs, most often 100 µF.
RSTpin 5Connected to: 3.3V 60% · a signal 40%
SLPpin 6Connected to: 3.3V 60% · a signal 40%
GNDpin 9Connected to: GND 80% · a signal 20%
FLTpin 10Connected to: Not connected 80% · a signal 20%
GND_MOTpin 15Connected to: GND 80% · a signal 20%
VMOTpin 16Connected to: 12V 80% · a signal 20%
  • Decoupling capacitor on 40% · 100 µF (2)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include UNDR by JohnDecebal, Rover-ELEC by rice-robotics-club, FINAL CONTROL BOARD by nyu-rdt and Stepper-Motor-Controller-PCB by Gautham-8066.

The DRV8825_STEPPER_MOTOR_DRIVER_CARRIER in open source designs

The gallery holds 6 open source boards using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER from 5 GitHub repositories; a typical one measures about 89.2 × 64.5 mm and carries around 30 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is UNDR by JohnDecebal.

Microcontrollers on boards using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER

What boards using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER are built for

DRV8825_STEPPER_MOTOR_DRIVER_CARRIER: common questions

Where can I find a DRV8825_STEPPER_MOTOR_DRIVER_CARRIER reference design?

Each of the 6 boards on this page is a real design using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER FLT pin connected?

The FLT pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER.

How is the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER RST pin connected?

The RST pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER.

How is the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER SLP pin connected?

The SLP pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER.

Which microcontrollers do boards using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER use?

Most are built on ESP32 (4), NXP (1) and RP2040/RP2350 (1).

How big is a typical board using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER?

The median is 89.2 × 64.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER?

By GitHub stars, UNDR by JohnDecebal, with 46 stars.

Can I simulate one of these boards using the DRV8825_STEPPER_MOTOR_DRIVER_CARRIER before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part