2 open source boards using the EMC2103-2-AP-TR

Real designs built with the EMC2103-2-AP-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The EMC2103-2-AP-TR in open source designs

The gallery holds 2 open source boards using the EMC2103-2-AP-TR from 2 GitHub repositories; a typical one measures about 168.5 × 105 mm and carries around 174 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is Naja duo by bitaxeorg.

Microcontrollers on boards using the EMC2103-2-AP-TR

EMC2103-2-AP-TR: common questions

Where can I find a EMC2103-2-AP-TR reference design?

Each of the 2 boards on this page is a real design using the EMC2103-2-AP-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the EMC2103-2-AP-TR?

The AP2502KTR-G1, ESP32-S3-WROOM-1-N16R8, TLV77308PDBVR, TLV77312PDBVR and TPS62933DRLR appear in the most repositories here.

Which microcontrollers do boards using the EMC2103-2-AP-TR use?

Most are built on ESP32 (2).

How big is a typical board using the EMC2103-2-AP-TR?

The median is 168.5 × 105 mm, and 0% are two-layer designs.

What is the most popular open source board using the EMC2103-2-AP-TR?

By GitHub stars, Naja duo by bitaxeorg, with 7 stars.

Can I simulate one of these boards using the EMC2103-2-AP-TR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part