4 open source boards using the ESP32-C3 Pro Mini

Real designs built with the ESP32-C3 Pro Mini, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ESP32-C3 Pro Mini in open source designs

The gallery holds 4 open source boards using the ESP32-C3 Pro Mini from 4 GitHub repositories; a typical one measures about 56.5 × 60.4 mm and carries around 54 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is SMHome UniversalRound ESP32 C3 Mini by abel-msk.

Microcontrollers on boards using the ESP32-C3 Pro Mini

ESP32-C3 Pro Mini: common questions

Where can I find a ESP32-C3 Pro Mini reference design?

Each of the 4 boards on this page is a real design using the ESP32-C3 Pro Mini. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ESP32-C3 Pro Mini use?

Most are built on ESP32 (4).

How big is a typical board using the ESP32-C3 Pro Mini?

The median is 56.5 × 60.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the ESP32-C3 Pro Mini?

By GitHub stars, SMHome UniversalRound ESP32 C3 Mini by abel-msk, with 1 stars.

Can I simulate one of these boards using the ESP32-C3 Pro Mini before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part