3 open source boards using the ESP32-C6
Real designs built with the ESP32-C6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Ledify
notaroomba
35.5 × 52.5 mm79 parts4LNo license0ESP32
ESP32C6 Board
phancak
100 × 50 mm71 parts4LMIT0ESP32
Esp32c6-pico
TreeNewbeer
18 × 29 mm59 parts4LNo license0
The ESP32-C6 in open source designs
The gallery holds 3 open source boards using the ESP32-C6 from 3 GitHub repositories; a typical one measures about 35.5 × 50 mm and carries around 71 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Ledify by notaroomba.
Microcontrollers on boards using the ESP32-C6
What boards using the ESP32-C6 are built for
ESP32-C6: common questions
Where can I find a ESP32-C6 reference design?
Each of the 3 boards on this page is a real design using the ESP32-C6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-C6 use?
Most are built on ESP32 (3).
How big is a typical board using the ESP32-C6?
The median is 35.5 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the ESP32-C6?
By GitHub stars, Ledify by notaroomba, with 0 stars.
Can I simulate one of these boards using the ESP32-C6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.