11 open source boards using the ESP32-S3-WROOM-1-N4R2
Real designs built with the ESP32-S3-WROOM-1-N4R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Casa cactus speaker
pablogs9
64.5 × 22.5 mm24 parts2LNo license3ESP32
Demo board v2
aranya-project
68 × 42 mm41 parts2LNo license1ESP32
Weather station
benjisu03
84.8 × 67 mm77 parts4LNo license0ESP32
Cheap wled controller
davidpoza
48 × 48 mm47 parts2LNo license0ESP32
Cheap wled controller
makespacemadrid
48 × 48 mm47 parts2LNo license0ESP32
Aqp moda HC
fvdhoef
141 × 89.5 mm181 parts2LMIT60ESP32
Jlcpcb panelized
davidpoza
96 × 96 mm47 parts2LNo license0ESP32
Jlcpcb panelized
makespacemadrid
96 × 96 mm47 parts2LNo license0ESP32
Aqp moda KBD
fvdhoef
141 × 89.5 mm181 parts2LMIT60ESP32
Aqp moda Ports
fvdhoef
141 × 89.5 mm181 parts2LMIT60ESP32
Aqp moda XBus
fvdhoef
141 × 89.5 mm181 parts2LMIT60
How designs wire the ESP32-S3-WROOM-1-N4R2
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-1-N4R2 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 5 of 6 designs, most often 4 kΩ (then 100 Ω).
- The 3V3 pin is tied to 3.3V on 5 of 6 designs.
- The EN pin has a capacitor to GND on 4 of 6 designs, most often 1 µF (then 10 µF).
- The IO13 pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 40 | Connected to: GND 95% | — |
| 3V3pin 2 | Connected to: 3.3V 83% · a signal 17% | — |
| ENpin 3 | Connected to: A connector 33% |
|
| IO7pin 7 | Connected to: A connector 67% |
|
| IO13pin 21 | Connected to: Not connected 60% · a signal 40% | — |
| IO14pin 22 | Connected to: Not connected 60% · a signal 40% | — |
| IO21pin 23 | Connected to: Not connected 60% · a signal 40% | — |
| IO48pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| IO45pin 26 | Connected to: Not connected 60% · a signal 40% | — |
| IO0pin 27 | Connected to: Signal 100% |
|
| IO35pin 28 | Connected to: Not connected 60% · a signal 40% | — |
| IO2pin 38 | Connected to: Not connected 60% · a signal 40% | — |
| EPADpin 41 | Connected to: GND 100% | — |
27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Aqp moda HC by fvdhoef, Casa cactus speaker by pablogs9, Demo board v2 by aranya-project and Weather station pcb by benjisu03.
The ESP32-S3-WROOM-1-N4R2 in open source designs
The gallery holds 11 open source boards using the ESP32-S3-WROOM-1-N4R2 from 6 GitHub repositories; a typical one measures about 96 × 89.5 mm and carries around 47 components.
91% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Aqp moda KBD by fvdhoef.
Parts used alongside the ESP32-S3-WROOM-1-N4R2
Microcontrollers on boards using the ESP32-S3-WROOM-1-N4R2
What boards using the ESP32-S3-WROOM-1-N4R2 are built for
ESP32-S3-WROOM-1-N4R2: common questions
Where can I find a ESP32-S3-WROOM-1-N4R2 reference design?
Each of the 11 boards on this page is a real design using the ESP32-S3-WROOM-1-N4R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-S3-WROOM-1-N4R2 EN pin?
The EN pin has a pull-up to 3.3V on 5 of 6 designs, most often 4 kΩ (then 100 Ω). Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-1-N4R2.
How is the ESP32-S3-WROOM-1-N4R2 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-1-N4R2.
How is the ESP32-S3-WROOM-1-N4R2 IO13 pin connected?
The IO13 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the ESP32-S3-WROOM-1-N4R2.
What parts are used alongside the ESP32-S3-WROOM-1-N4R2?
The AMS1117-3.3, CH224K, MX5014S, TPS54202DDC and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the ESP32-S3-WROOM-1-N4R2 use?
Most are built on ESP32 (11).
How big is a typical board using the ESP32-S3-WROOM-1-N4R2?
The median is 96 × 89.5 mm, and 91% are two-layer designs.
What is the most popular open source board using the ESP32-S3-WROOM-1-N4R2?
By GitHub stars, Aqp moda KBD by fvdhoef, with 60 stars.
Can I simulate one of these boards using the ESP32-S3-WROOM-1-N4R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.