2 open source boards using the EVA-M8M-0

Real designs built with the EVA-M8M-0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The EVA-M8M-0 in open source designs

The gallery holds 2 open source boards using the EVA-M8M-0 from 2 GitHub repositories; a typical one measures about 51 × 30 mm and carries around 173 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is LoRa mPCIe by NebraLtd.

Parts used alongside the EVA-M8M-0

What boards using the EVA-M8M-0 are built for

EVA-M8M-0: common questions

Where can I find a EVA-M8M-0 reference design?

Each of the 2 boards on this page is a real design using the EVA-M8M-0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the EVA-M8M-0?

The SKY66423-11, SX1250IMLTRT and SX1303IMLTRT appear in the most repositories here.

How big is a typical board using the EVA-M8M-0?

The median is 51 × 30 mm, and 0% are two-layer designs.

What is the most popular open source board using the EVA-M8M-0?

By GitHub stars, LoRa mPCIe by NebraLtd, with 21 stars.

Can I simulate one of these boards using the EVA-M8M-0 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part