3 open source boards using the SX1250IMLTRT
Real designs built with the SX1250IMLTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LoRa mPCIe
NebraLtd
51 × 30 mm171 parts6LApache-2.021Raspberry Pi
Masters thesis lora gateway compute module cubesat payload
dpmj
90.2 × 95.9 mm338 parts6LCERN-OHL-S-2.02Lora gateway cm4
bkrajendra
51 × 30 mm175 parts6LNo license0
The SX1250IMLTRT in open source designs
The gallery holds 3 open source boards using the SX1250IMLTRT from 3 GitHub repositories; a typical one measures about 51 × 30 mm and carries around 175 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is LoRa mPCIe by NebraLtd.
Parts used alongside the SX1250IMLTRT
Microcontrollers on boards using the SX1250IMLTRT
What boards using the SX1250IMLTRT are built for
SX1250IMLTRT: common questions
Where can I find a SX1250IMLTRT reference design?
Each of the 3 boards on this page is a real design using the SX1250IMLTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SX1250IMLTRT?
The B39871B4377P810, EVA-M8M-0, SKY66423-11 and SX1303IMLTRT appear in the most repositories here.
Which microcontrollers do boards using the SX1250IMLTRT use?
Most are built on Raspberry Pi (1).
How big is a typical board using the SX1250IMLTRT?
The median is 51 × 30 mm, and 0% are two-layer designs.
What is the most popular open source board using the SX1250IMLTRT?
By GitHub stars, LoRa mPCIe by NebraLtd, with 21 stars.
Can I simulate one of these boards using the SX1250IMLTRT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.