3 open source boards using the Flipper_Zero
Real designs built with the Flipper_Zero, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Yrm100-rfid flipper board
Hanz-Tech
64 × 54.6 mm10 parts2LMIT2
ESP32Flipper Zero Wifi Module
aaakum4
80 × 40 mm56 parts4LGPL-3.01
IR Blaster Module
80 × 20 mm15 parts2LGPL-3.01
The Flipper_Zero in open source designs
The gallery holds 3 open source boards using the Flipper_Zero from 2 GitHub repositories; a typical one measures about 80 × 40 mm and carries around 15 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Yrm100-rfid flipper board by Hanz-Tech.
Microcontrollers on boards using the Flipper_Zero
What boards using the Flipper_Zero are built for
Flipper_Zero: common questions
Where can I find a Flipper_Zero reference design?
Each of the 3 boards on this page is a real design using the Flipper_Zero. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Flipper_Zero use?
Most are built on ESP32 (1).
How big is a typical board using the Flipper_Zero?
The median is 80 × 40 mm, and 67% are two-layer designs.
What is the most popular open source board using the Flipper_Zero?
By GitHub stars, Yrm100-rfid flipper board by Hanz-Tech, with 2 stars.
Can I simulate one of these boards using the Flipper_Zero before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.