10 open source boards using the FM24C64B
Real designs built with the FM24C64B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Td deflect
tdaede
174 × 104 mm165 parts4LNo license370EKO Miner BM1366-13xx 16-01A
phil31
148.4 × 99.8 mm532 parts6LGPL-3.05Bpm usb
JohnDMcMaster
36.8 × 40.8 mm36 parts4LNo license2STM32
UCB board
bartkepl
56.8 × 100 mm148 parts4LMIT0EKO Miner BM1366-13xx 16-01B
phil31
148.4 × 99.8 mm514 parts6LGPL-3.05I2C
KALTCHUK
99.7 × 69.9 mm31 parts2LNo license94AsicsBoard - 16xBM1368 - 01A
phil31
139.8 × 65 mm394 parts6LGPL-3.05AsicsBoard - 16xBM1366 - 01A
phil31
140 × 65 mm368 parts6LGPL-3.05AsicsBoard - 10xBM1370 - 01A
phil31
139.8 × 65 mm256 parts6LGPL-3.05EKO Miner PowerBoard-53667
phil31
153 × 99.8 mm240 parts6LGPL-3.05
How designs wire the FM24C64B
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the FM24C64B connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF).
- The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 2.2 kΩ (then 6.8 kΩ).
- The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 2.2 kΩ (then 6.8 kΩ).
- The A1 pin is tied to GND on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: GND 60% · VDD3_0 40% | — |
| A1pin 2 | Connected to: GND 80% · VDD2_0 20% | — |
| A2pin 3 | Connected to: GND 80% · VDD1_0 20% | — |
| VSSpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: A connector 60%, the microcontroller 40% |
|
| SCLpin 6 | Connected to: A connector 60%, the microcontroller 40% |
|
| WPpin 7 | Connected to: GND 60% · a signal 40% | — |
| VDDpin 8 | Connected to: 3.3V 67% · a signal 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Td deflect by tdaede, I2C by KALTCHUK, AsicsBoard - 10xBM1370 - 01A by phil31 and Bpm usb by JohnDMcMaster.
The FM24C64B in open source designs
The gallery holds 10 open source boards using the FM24C64B from 5 GitHub repositories; a typical one measures about 139.9 × 84.8 mm and carries around 248 components.
90% use four copper layers or more, and 70% carry an open source license.
The most starred is Td deflect by tdaede.
Microcontrollers on boards using the FM24C64B
What boards using the FM24C64B are built for
FM24C64B: common questions
Where can I find a FM24C64B reference design?
Each of the 10 boards on this page is a real design using the FM24C64B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the FM24C64B VDD pin?
The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the FM24C64B.
What pull-up resistor is used on the FM24C64B SDA pin?
The SDA pin has a pull-up to 3.3V on 4 of 5 designs, most often 2.2 kΩ (then 6.8 kΩ). Counted from the KiCad layouts of 5 open source designs using the FM24C64B.
What pull-up resistor is used on the FM24C64B SCL pin?
The SCL pin has a pull-up to 3.3V on 4 of 5 designs, most often 2.2 kΩ (then 6.8 kΩ). Counted from the KiCad layouts of 5 open source designs using the FM24C64B.
Which microcontrollers do boards using the FM24C64B use?
Most are built on STM32 (2).
How big is a typical board using the FM24C64B?
The median is 139.9 × 84.8 mm, and 10% are two-layer designs.
What is the most popular open source board using the FM24C64B?
By GitHub stars, Td deflect by tdaede, with 370 stars.
Can I simulate one of these boards using the FM24C64B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.