4 open source boards using the FSUSB30MUX

Real designs built with the FSUSB30MUX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The FSUSB30MUX in open source designs

The gallery holds 4 open source boards using the FSUSB30MUX from 4 GitHub repositories; a typical one measures about 91.5 × 80 mm and carries around 163 components.

75% use four copper layers or more, and 25% carry an open source license.

The most starred is PWNSAT by ElectronicCats.

Parts used alongside the FSUSB30MUX

Microcontrollers on boards using the FSUSB30MUX

What boards using the FSUSB30MUX are built for

FSUSB30MUX: common questions

Where can I find a FSUSB30MUX reference design?

Each of the 4 boards on this page is a real design using the FSUSB30MUX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the FSUSB30MUX?

The AP2114H-3.3, EA3059, MT3608, SL2.1A and W25N02KVZEIR appear in the most repositories here.

Which microcontrollers do boards using the FSUSB30MUX use?

Most are built on Raspberry Pi (1) and STM32 (1).

How big is a typical board using the FSUSB30MUX?

The median is 91.5 × 80 mm, and 25% are two-layer designs.

What is the most popular open source board using the FSUSB30MUX?

By GitHub stars, PWNSAT by ElectronicCats, with 35 stars.

Can I simulate one of these boards using the FSUSB30MUX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part