4 open source boards using the FT2232ST
Real designs built with the FT2232ST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Powerboard v1
TIGERs-Mannheim
90 × 80 mm372 parts4LCustom license9STM32
Base Station v3b
TIGERs-Mannheim
58 × 85 mm130 parts4LCustom license9STM32
Base Station v3b
DVA490-474-Project-Course
58 × 85 mm130 parts4LMIT0STM32
Mainboard v13
DVA490-474-Project-Course
80 × 85 mm118 parts4LMIT0
The FT2232ST in open source designs
The gallery holds 4 open source boards using the FT2232ST from 2 GitHub repositories; a typical one measures about 69 × 85 mm and carries around 130 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Powerboard v1 by TIGERs-Mannheim.
Parts used alongside the FT2232ST
Microcontrollers on boards using the FT2232ST
FT2232ST: common questions
Where can I find a FT2232ST reference design?
Each of the 4 boards on this page is a real design using the FT2232ST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the FT2232ST?
The 74LVC1G125DBV, 93C76B, BMI-S-204-F, CP11009 and DP83848CVV appear in the most repositories here.
Which microcontrollers do boards using the FT2232ST use?
Most are built on STM32 (3).
How big is a typical board using the FT2232ST?
The median is 69 × 85 mm, and 0% are two-layer designs.
What is the most popular open source board using the FT2232ST?
By GitHub stars, Powerboard v1 by TIGERs-Mannheim, with 9 stars.
Can I simulate one of these boards using the FT2232ST before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.