3 open source boards using the LT3080ST
Real designs built with the LT3080ST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Powerboard v1
TIGERs-Mannheim
90 × 80 mm372 parts4LCustom license9STM32
Mainboard v13
TIGERs-Mannheim
80 × 85 mm118 parts4LCustom license9STM32
Mainboard v13
DVA490-474-Project-Course
80 × 85 mm118 parts4LMIT0
The LT3080ST in open source designs
The gallery holds 3 open source boards using the LT3080ST from 2 GitHub repositories; a typical one measures about 80 × 85 mm and carries around 118 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Powerboard v1 by TIGERs-Mannheim.
Parts used alongside the LT3080ST
Microcontrollers on boards using the LT3080ST
LT3080ST: common questions
Where can I find a LT3080ST reference design?
Each of the 3 boards on this page is a real design using the LT3080ST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LT3080ST?
The FT2232ST, LP5907MFX-3.3, SKY66112 and SX1280 appear in the most repositories here.
Which microcontrollers do boards using the LT3080ST use?
Most are built on STM32 (2).
How big is a typical board using the LT3080ST?
The median is 80 × 85 mm, and 0% are two-layer designs.
What is the most popular open source board using the LT3080ST?
By GitHub stars, Powerboard v1 by TIGERs-Mannheim, with 9 stars.
Can I simulate one of these boards using the LT3080ST before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.