3 open source boards using the FT232HL-REEL
Real designs built with the FT232HL-REEL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Interface board
BetzDrive
70 × 70 mm126 parts4LCERN-OHL-P-2.05STM32
USB2RoMeLa Boosted
RoMeLaUCLA
18 × 31.8 mm58 parts4LMIT2RP2040/RP2350
PC-Link-Bridge PCB-and software
fikruyenialem-cpu
85 × 45 mm8 parts4LNo license0
The FT232HL-REEL in open source designs
The gallery holds 3 open source boards using the FT232HL-REEL from 3 GitHub repositories; a typical one measures about 70 × 45 mm and carries around 58 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Interface board by BetzDrive.
Microcontrollers on boards using the FT232HL-REEL
What boards using the FT232HL-REEL are built for
FT232HL-REEL: common questions
Where can I find a FT232HL-REEL reference design?
Each of the 3 boards on this page is a real design using the FT232HL-REEL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FT232HL-REEL use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the FT232HL-REEL?
The median is 70 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the FT232HL-REEL?
By GitHub stars, Interface board by BetzDrive, with 5 stars.
Can I simulate one of these boards using the FT232HL-REEL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.