2 open source boards using the FXL6408UMX
Real designs built with the FXL6408UMX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Phyduino pico2
perc-sw
68.6 × 53.3 mm152 parts4LGPL-3.00ESP32
Twisted
Triax-Labs
14 × 32.7 mm49 parts4LCC-BY-NC-4.02
The FXL6408UMX in open source designs
The gallery holds 2 open source boards using the FXL6408UMX from 2 GitHub repositories; a typical one measures about 41.3 × 43 mm and carries around 101 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Twisted by Triax-Labs.
Microcontrollers on boards using the FXL6408UMX
What boards using the FXL6408UMX are built for
FXL6408UMX: common questions
Where can I find a FXL6408UMX reference design?
Each of the 2 boards on this page is a real design using the FXL6408UMX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FXL6408UMX use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the FXL6408UMX?
The median is 41.3 × 43 mm, and 0% are two-layer designs.
What is the most popular open source board using the FXL6408UMX?
By GitHub stars, Twisted by Triax-Labs, with 2 stars.
Can I simulate one of these boards using the FXL6408UMX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.