4 open source boards using the GP2S700HCP
Real designs built with the GP2S700HCP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SensorBar
uw-x
8.1 × 25 mm17 parts2LNo license14Rokisi sensor
mdumas2
90.9 × 61.8 mm49 parts2LBSD-3-Clause0AVR/Arduino
Pannel
atuleu
46 × 69.5 mm17 parts2LCERN-OHL-S-2.00AVR/Arduino
Tunnel-IR-barrier
atuleu
10 × 50 mm17 parts2LCERN-OHL-S-2.00
The GP2S700HCP in open source designs
The gallery holds 4 open source boards using the GP2S700HCP from 3 GitHub repositories; a typical one measures about 28 × 55.9 mm and carries around 17 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is SensorBar by uw-x.
Microcontrollers on boards using the GP2S700HCP
What boards using the GP2S700HCP are built for
GP2S700HCP: common questions
Where can I find a GP2S700HCP reference design?
Each of the 4 boards on this page is a real design using the GP2S700HCP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the GP2S700HCP use?
Most are built on AVR/Arduino (2).
How big is a typical board using the GP2S700HCP?
The median is 28 × 55.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the GP2S700HCP?
By GitHub stars, SensorBar by uw-x, with 14 stars.
Can I simulate one of these boards using the GP2S700HCP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.