4 open source boards using the HD3SS3220IRNHR
Real designs built with the HD3SS3220IRNHR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MicroSD-Switcher-Reader
will127534
42.3 × 60.2 mm72 parts4LMIT25Internal-USB-Hub
wozniak-works
109.4 × 102 mm303 parts6LCERN-OHL-P-2.03Konoha
aisuneko
80 × 80 mm97 parts4LCERN-OHL-S-2.01- schematic only · 1352 partsSTM32
Mira
max-talanov
1352 parts2LMIT0
The HD3SS3220IRNHR in open source designs
The gallery holds 4 open source boards using the HD3SS3220IRNHR from 4 GitHub repositories; a typical one measures about 80 × 80 mm and carries around 200 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is MicroSD-Switcher-Reader by will127534.
Parts used alongside the HD3SS3220IRNHR
Microcontrollers on boards using the HD3SS3220IRNHR
What boards using the HD3SS3220IRNHR are built for
HD3SS3220IRNHR: common questions
Where can I find a HD3SS3220IRNHR reference design?
Each of the 4 boards on this page is a real design using the HD3SS3220IRNHR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the HD3SS3220IRNHR use?
Most are built on STM32 (1).
How big is a typical board using the HD3SS3220IRNHR?
The median is 80 × 80 mm, and 25% are two-layer designs.
What is the most popular open source board using the HD3SS3220IRNHR?
By GitHub stars, MicroSD-Switcher-Reader by will127534, with 25 stars.
Can I simulate one of these boards using the HD3SS3220IRNHR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.