3 open source boards using the HD44780
Real designs built with the HD44780, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
ATAPIMega
Manawyrm
100 × 100 mm59 parts4LGPL-3.019AVR/Arduino
Main
qweqq
158.8 × 65.7 mm116 parts2LMIT1AVR/Arduino
Cd reader
RonieMuller1976
100 × 100 mm59 parts4LGPL-3.00
The HD44780 in open source designs
The gallery holds 3 open source boards using the HD44780 from 3 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 59 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is ATAPIMega by Manawyrm.
Parts used alongside the HD44780
Microcontrollers on boards using the HD44780
What boards using the HD44780 are built for
HD44780: common questions
Where can I find a HD44780 reference design?
Each of the 3 boards on this page is a real design using the HD44780. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the HD44780 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the HD44780?
The median is 100 × 100 mm, and 33% are two-layer designs.
What is the most popular open source board using the HD44780?
By GitHub stars, ATAPIMega by Manawyrm, with 19 stars.
Can I simulate one of these boards using the HD44780 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.