2 open source boards using the heatsink
Real designs built with the heatsink, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Stmbl 4.0
rene-dev
100 × 100 mm412 parts2LGPL-3.0979STM32
Stmbl 4.0
emdotnet
100 × 100 mm412 parts2LGPL-3.00
The heatsink in open source designs
The gallery holds 2 open source boards using the heatsink from 2 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 412 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Stmbl 4.0 by rene-dev.
Parts used alongside the heatsink
Microcontrollers on boards using the heatsink
What boards using the heatsink are built for
heatsink: common questions
Where can I find a heatsink reference design?
Each of the 2 boards on this page is a real design using the heatsink. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the heatsink?
The ACT4088, fan, IRAM256a, LM358 and lnk304D appear in the most repositories here.
Which microcontrollers do boards using the heatsink use?
Most are built on STM32 (2).
How big is a typical board using the heatsink?
The median is 100 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the heatsink?
By GitHub stars, Stmbl 4.0 by rene-dev, with 979 stars.
Can I simulate one of these boards using the heatsink before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.