2 open source boards using the non_plated
Real designs built with the non_plated, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Stmbl 4.0
rene-dev
100 × 100 mm412 parts2LGPL-3.0979
STM32Stmbl 4.0
coon42
100 × 100 mm409 parts2LGPL-3.01
The non_plated in open source designs
The gallery holds 2 open source boards using the non_plated from 2 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 411 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Stmbl 4.0 by rene-dev.
Parts used alongside the non_plated
Microcontrollers on boards using the non_plated
What boards using the non_plated are built for
non_plated: common questions
Where can I find a non_plated reference design?
Each of the 2 boards on this page is a real design using the non_plated. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the non_plated?
The ACT4088, IRAM256a, LM358, lnk304D and SI8621 appear in the most repositories here.
Which microcontrollers do boards using the non_plated use?
Most are built on STM32 (2).
How big is a typical board using the non_plated?
The median is 100 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the non_plated?
By GitHub stars, Stmbl 4.0 by rene-dev, with 979 stars.
Can I simulate one of these boards using the non_plated before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.