6 open source boards using the HT-RA62

Real designs built with the HT-RA62, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the HT-RA62

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the HT-RA62 connects to, and the resistors, capacitors and other passives placed on it.

  • The 3V3 pin is tied to 3.3V on 5 of 5 designs.
  • The TXEN pin is left unconnected on 5 of 5 designs.
  • The DIO2 pin is left unconnected on 5 of 5 designs.
  • The DIO3 pin is left unconnected on 5 of 5 designs.
ANTpin 1Connected to: Not connected 80% · a signal 20%
GNDpin 2, 9, 16Connected to: GND 100%
3V3pin 3Connected to: 3.3V 100%
TXENpin 5Connected to: Not connected 100%
DIO2pin 7Connected to: Not connected 100%
DIO3pin 8Connected to: Not connected 100%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RoTec pcb by mofosyne, MiniSolarMesh by aresta, Pro meowcro by Stary2001 and Meshbee hardware by fablab-imperia.

The HT-RA62 in open source designs

The gallery holds 6 open source boards using the HT-RA62 from 5 GitHub repositories; a typical one measures about 50 × 51 mm and carries around 34 components.

83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is RoTec pcb by mofosyne.

Parts used alongside the HT-RA62

Microcontrollers on boards using the HT-RA62

What boards using the HT-RA62 are built for

HT-RA62: common questions

Where can I find a HT-RA62 reference design?

Each of the 6 boards on this page is a real design using the HT-RA62. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the HT-RA62 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the HT-RA62.

How is the HT-RA62 TXEN pin connected?

The TXEN pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the HT-RA62.

How is the HT-RA62 DIO2 pin connected?

The DIO2 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the HT-RA62.

Which microcontrollers do boards using the HT-RA62 use?

Most are built on ESP32 (3) and Nordic nRF (1).

How big is a typical board using the HT-RA62?

The median is 50 × 51 mm, and 83% are two-layer designs.

What is the most popular open source board using the HT-RA62?

By GitHub stars, RoTec pcb by mofosyne, with 17 stars.

Can I simulate one of these boards using the HT-RA62 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part