5 open source boards using the HT7533
Real designs built with the HT7533, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Multislope-3I
NNNILabs
100 × 74 mm124 parts4LMIT43STM32
STM32-Training-Board with-LEDs and-MAX30102
lkoehli
64.8 × 85.3 mm72 parts2LNo license2STM32
XCS-03A-MAIN
hedong2023
153.6 × 50 mm242 parts2LNo license0STM32
Grow light
GeoffreyKassis
50 × 50 mm69 parts4LNo license0AVR/Arduino
Portable Charger
jacksterb1234
38.6 × 31.8 mm38 parts2LNo license0
How designs wire the HT7533
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the HT7533 connects to, and the resistors, capacitors and other passives placed on it.
- The VOUT pin has a decoupling capacitor on 4 of 5 designs, most often 10 µF (then 1 µF).
- The VIN pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VINpin 2 | Connected to: VBUS 100% |
|
| VOUTpin 3 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Multislope-3I by NNNILabs, STM32-Training-Board with-LEDs and-MAX30102 by lkoehli, Grow light by GeoffreyKassis and XCS-03A-MAIN by hedong2023.
The HT7533 in open source designs
The gallery holds 5 open source boards using the HT7533 from 5 GitHub repositories; a typical one measures about 64.8 × 50 mm and carries around 72 components.
60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Multislope-3I by NNNILabs.
Microcontrollers on boards using the HT7533
What boards using the HT7533 are built for
HT7533: common questions
Where can I find a HT7533 reference design?
Each of the 5 boards on this page is a real design using the HT7533. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the HT7533 VOUT pin?
The VOUT pin has a decoupling capacitor on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the HT7533.
What decoupling capacitors do designs use on the HT7533 VIN pin?
The VIN pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the HT7533.
Which microcontrollers do boards using the HT7533 use?
Most are built on STM32 (3), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the HT7533?
The median is 64.8 × 50 mm, and 60% are two-layer designs.
What is the most popular open source board using the HT7533?
By GitHub stars, Multislope-3I by NNNILabs, with 43 stars.
Can I simulate one of these boards using the HT7533 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.