2 open source boards using the ILQ615-3
Real designs built with the ILQ615-3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vfd rat king
jrlomas
40 × 45 mm9 parts2LCC-BY-NC-4.00- schematic only · 253 partsAVR/Arduino
Camper van
akladnig
253 parts2LNo license0
The ILQ615-3 in open source designs
The gallery holds 2 open source boards using the ILQ615-3 from 2 GitHub repositories; a typical one measures about 40 × 45 mm and carries around 131 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Camper van by akladnig.
Microcontrollers on boards using the ILQ615-3
What boards using the ILQ615-3 are built for
ILQ615-3: common questions
Where can I find a ILQ615-3 reference design?
Each of the 2 boards on this page is a real design using the ILQ615-3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ILQ615-3 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the ILQ615-3?
The median is 40 × 45 mm, and 100% are two-layer designs.
What is the most popular open source board using the ILQ615-3?
By GitHub stars, Camper van by akladnig, with 0 stars.
Can I simulate one of these boards using the ILQ615-3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.