2 open source boards using the INA190A3IDDFR
Real designs built with the INA190A3IDDFR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
E psu hardware
embedded-pro
100 × 100 mm223 parts4LCERN-OHL-P-2.00AVR/Arduino
Arduino-Ornament
madcow4242
99 × 117.7 mm53 parts2LNo license0
The INA190A3IDDFR in open source designs
The gallery holds 2 open source boards using the INA190A3IDDFR from 2 GitHub repositories; a typical one measures about 99.5 × 108.8 mm and carries around 138 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is E psu hardware by embedded-pro.
Microcontrollers on boards using the INA190A3IDDFR
What boards using the INA190A3IDDFR are built for
INA190A3IDDFR: common questions
Where can I find a INA190A3IDDFR reference design?
Each of the 2 boards on this page is a real design using the INA190A3IDDFR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA190A3IDDFR use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the INA190A3IDDFR?
The median is 99.5 × 108.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the INA190A3IDDFR?
By GitHub stars, E psu hardware by embedded-pro, with 0 stars.
Can I simulate one of these boards using the INA190A3IDDFR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.