4 open source boards using the INA226AQDGSRQ1
Real designs built with the INA226AQDGSRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Sabre-Integrated flight controller
CircuitGuy943
60 × 137.1 mm260 parts4LGPL-3.02ESP32
SisuAssistant
Cadburies
66.5 × 70 mm155 parts4LApache-2.01STM32
Chromapi motherboard
Mowibox
88.1 × 59.4 mm105 parts4LApache-2.01AVR/Arduino
OBC644-10D
kentN
45 × 45 mm57 parts2LMIT1
The INA226AQDGSRQ1 in open source designs
The gallery holds 4 open source boards using the INA226AQDGSRQ1 from 4 GitHub repositories; a typical one measures about 63.3 × 64.7 mm and carries around 130 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is Sabre-Integrated flight controller by CircuitGuy943.
Microcontrollers on boards using the INA226AQDGSRQ1
What boards using the INA226AQDGSRQ1 are built for
INA226AQDGSRQ1: common questions
Where can I find a INA226AQDGSRQ1 reference design?
Each of the 4 boards on this page is a real design using the INA226AQDGSRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA226AQDGSRQ1 use?
Most are built on STM32 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the INA226AQDGSRQ1?
The median is 63.3 × 64.7 mm, and 25% are two-layer designs.
What is the most popular open source board using the INA226AQDGSRQ1?
By GitHub stars, Sabre-Integrated flight controller by CircuitGuy943, with 2 stars.
Can I simulate one of these boards using the INA226AQDGSRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.