13 open source boards using the SN74LVC1G11DBVR
Real designs built with the SN74LVC1G11DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1Project ATO / Supervision
pratham-cloud-ctrl
300 × 250 mm479 parts4LCustom license0ESP32
Assembly preview
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00FE UFPR 4 0
josearistidesbail
159.6 × 130 mm313 parts4LNo license04-bit-Adder-Interface-Board
Shaxzodm2611
100 × 82.2 mm125 parts4LNo license0- schematic only · 1352 partsSTM32
Mira
max-talanov
1352 parts2LMIT0 - schematic only · 155 parts
PCM
vectivolt
155 partsNo license0 ESP32
Carrier
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00Project ATO / Current Driver
pratham-cloud-ctrl
175 × 155 mm156 parts4LCustom license0Project ATO / Power
pratham-cloud-ctrl
175 × 185 mm156 parts4LCustom license0Project ATO / Contact Router
pratham-cloud-ctrl
175 × 155 mm155 parts4LCustom license0Project ATO / Monitoring Cell
pratham-cloud-ctrl
120 × 145 mm71 parts4LCustom license0
How designs wire the SN74LVC1G11DBVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74LVC1G11DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The A_1 pin has a series resistor on 3 of 6 designs, most often 0 Ω (then 10 kΩ).
- The B_3 pin has a resistor to GND on 3 of 6 designs, most often 10 kΩ (then 4.7 kΩ).
- The VCC_5 pin has a capacitor to GND on 3 of 6 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A_1pin 1 | Connected to: A connector 50%, SN74LVC1G11DBVR 33% |
|
| GND_2pin 2 | Connected to: GND 83% · a signal 17% | — |
| B_3pin 3 | Connected to: SN74LVC1G11DBVR 33%, a connector 33% |
|
| Y_4pin 4 | Connected to: Signal 100% |
|
| VCC_5pin 5 | Connected to: 3.3V 50% · a signal 50% |
|
| C_6pin 6 | Connected to: SN74LVC1G14DBVR 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hub by Bruhdows, Bldc esc by EwoudVV, FE UFPR 4 0 by josearistidesbail and Project ATO / Contact Router by pratham-cloud-ctrl.
The SN74LVC1G11DBVR in open source designs
The gallery holds 13 open source boards using the SN74LVC1G11DBVR from 8 GitHub repositories; a typical one measures about 159.6 × 145 mm and carries around 309 components.
92% use four copper layers or more, and 23% carry an open source license.
The most starred is Bldc esc by EwoudVV.
Parts used alongside the SN74LVC1G11DBVR
What boards using the SN74LVC1G11DBVR are built for
SN74LVC1G11DBVR: common questions
Where can I find a SN74LVC1G11DBVR reference design?
Each of the 13 boards on this page is a real design using the SN74LVC1G11DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SN74LVC1G11DBVR A_1 pin?
The A_1 pin has a series resistor on 3 of 6 designs, most often 0 Ω (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G11DBVR.
What resistor goes on the SN74LVC1G11DBVR B_3 pin?
The B_3 pin has a resistor to GND on 3 of 6 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G11DBVR.
How is the SN74LVC1G11DBVR VCC_5 pin connected?
The VCC_5 pin has a capacitor to GND on 3 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G11DBVR.
What parts are used alongside the SN74LVC1G11DBVR?
The SN74LVC1G08DBVR, SN74LVC1G32DBVR, SN74LVC1G04DBVR, USBLC6-2SC6 and INA241A2IDR appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G11DBVR use?
Most are built on STM32 (3) and ESP32 (2).
How big is a typical board using the SN74LVC1G11DBVR?
The median is 159.6 × 145 mm, and 8% are two-layer designs.
What is the most popular open source board using the SN74LVC1G11DBVR?
By GitHub stars, Bldc esc by EwoudVV, with 1 stars.
Can I simulate one of these boards using the SN74LVC1G11DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.