3 open source boards using the ISO3082DWR
Real designs built with the ISO3082DWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PiPLC-Mainboard
Chrismettal
158 × 85 mm144 parts2LCC-BY-SA-4.019Poetato
jonasblixt
139 × 87 mm271 parts6LCustom license0STM32
Rapid-CoreX
Arockiyalipson
130 × 85 mm166 parts4LMIT0
The ISO3082DWR in open source designs
The gallery holds 3 open source boards using the ISO3082DWR from 3 GitHub repositories; a typical one measures about 139 × 85 mm and carries around 166 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is PiPLC-Mainboard by Chrismettal.
Microcontrollers on boards using the ISO3082DWR
What boards using the ISO3082DWR are built for
ISO3082DWR: common questions
Where can I find a ISO3082DWR reference design?
Each of the 3 boards on this page is a real design using the ISO3082DWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ISO3082DWR use?
Most are built on STM32 (1).
How big is a typical board using the ISO3082DWR?
The median is 139 × 85 mm, and 33% are two-layer designs.
What is the most popular open source board using the ISO3082DWR?
By GitHub stars, PiPLC-Mainboard by Chrismettal, with 19 stars.
Can I simulate one of these boards using the ISO3082DWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.