5 open source boards using the JDY-33

Real designs built with the JDY-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the JDY-33

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the JDY-33 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 is left unconnected on 5 of 5 designs.
  • Pin 4 is left unconnected on 5 of 5 designs.
  • The IO1 pin is left unconnected on 5 of 5 designs.
  • The IO2 pin is left unconnected on 5 of 5 designs.
Pin 3Connected to: Not connected 100%
Pin 4Connected to: Not connected 100%
IO1pin 5Connected to: Not connected 100%
IO2pin 6Connected to: Not connected 100%
Pin 7Connected to: Not connected 100%
Pin 8Connected to: Not connected 100%
Pin 9Connected to: Not connected 100%
Pin 10Connected to: Not connected 100%
Pin 11Connected to: Not connected 100%
3V3pin 12Connected to: 3.3V 80% · a signal 20%
GNDpin 13Connected to: GND 100%
Pin 14Connected to: Not connected 100%
ENpin 15Connected to: Not connected 100%
ALEDpin 16Connected to: Not connected 100%
STATpin 17Connected to: Not connected 100%
Pin 18Connected to: Not connected 100%
Pin 19Connected to: Not connected 100%
Pin 20Connected to: Not connected 100%
Pin 21Connected to: Not connected 100%
Pin 22Connected to: Not connected 100%
Pin 23Connected to: Not connected 100%
Pin 24Connected to: Not connected 100%
Pin 25Connected to: Not connected 100%
Pin 26Connected to: Not connected 100%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Uaefi by rusefi, Alphax-2chan by rusefi, Alphax-4chan by rusefi and Alphax-4chan by TunerTools.

The JDY-33 in open source designs

The gallery holds 5 open source boards using the JDY-33 from 5 GitHub repositories; a typical one measures about 96.5 × 114.7 mm and carries around 275 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Uaefi by rusefi.

Parts used alongside the JDY-33

JDY-33: common questions

Where can I find a JDY-33 reference design?

Each of the 5 boards on this page is a real design using the JDY-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the JDY-33 pin 3 connected?

Pin 3 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the JDY-33.

How is the JDY-33 pin 4 connected?

Pin 4 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the JDY-33.

How is the JDY-33 IO1 pin connected?

The IO1 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the JDY-33.

How big is a typical board using the JDY-33?

The median is 96.5 × 114.7 mm, and 0% are two-layer designs.

What is the most popular open source board using the JDY-33?

By GitHub stars, Uaefi by rusefi, with 36 stars.

Can I simulate one of these boards using the JDY-33 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part