4 open source boards using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM))
Real designs built with the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32STMP1-OLinuXino
OLIMEX
84 × 59.6 mm387 parts8LGPL-3.013
RK3328-SOM-EBV
99.1 × 78.7 mm128 parts4LGPL-3.08
A64-OlinuXino Rev E
Jegeva
90 × 62.5 mm412 parts6LNo license0- schematic only · 463 parts
Kicad pinout gen
code2circuit
463 partsNo license0
The KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) in open source designs
The gallery holds 4 open source boards using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) from 4 GitHub repositories; a typical one measures about 90 × 62.5 mm and carries around 400 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is STMP1-OLinuXino by OLIMEX.
Parts used alongside the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM))
Microcontrollers on boards using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM))
What boards using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) are built for
KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)): common questions
Where can I find a KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) reference design?
Each of the 4 boards on this page is a real design using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM))?
The NA(RCLAMP0524P(SLP2510P8)), SY6280AAC(SOT23-5), AXP803(QFN68_8x8mm), MT3608(SOT23-6) and AllWinner-A64(FBGA396) appear in the most repositories here.
Which microcontrollers do boards using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) use?
Most are built on STM32 (1).
How big is a typical board using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM))?
The median is 90 × 62.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM))?
By GitHub stars, STMP1-OLinuXino by OLIMEX, with 13 stars.
Can I simulate one of these boards using the KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.