9 open source boards using the NA(RCLAMP0524P(SLP2510P8))

Real designs built with the NA(RCLAMP0524P(SLP2510P8)), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the NA(RCLAMP0524P(SLP2510P8))

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the NA(RCLAMP0524P(SLP2510P8)) connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 3, 8Connected to: GND 100%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-P4-PC Rev B by OLIMEX, MIPI-HDMI by OLIMEX, STMP1-OLinuXino by OLIMEX and IMX8MP-SOM-EVB by OLIMEX.

The NA(RCLAMP0524P(SLP2510P8)) in open source designs

The gallery holds 9 open source boards using the NA(RCLAMP0524P(SLP2510P8)) from 8 GitHub repositories; a typical one measures about 72 × 84.4 mm and carries around 329 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is ESP32-P4-PC Rev B by OLIMEX.

Microcontrollers on boards using the NA(RCLAMP0524P(SLP2510P8))

What boards using the NA(RCLAMP0524P(SLP2510P8)) are built for

NA(RCLAMP0524P(SLP2510P8)): common questions

Where can I find a NA(RCLAMP0524P(SLP2510P8)) reference design?

Each of the 9 boards on this page is a real design using the NA(RCLAMP0524P(SLP2510P8)). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the NA(RCLAMP0524P(SLP2510P8))?

The MT3608(SOT23-6), SY6280AAC(SOT23-5), KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)), AXP803(QFN68_8x8mm) and LT8912B(QFN64) appear in the most repositories here.

Which microcontrollers do boards using the NA(RCLAMP0524P(SLP2510P8)) use?

Most are built on ESP32 (3) and STM32 (1).

How big is a typical board using the NA(RCLAMP0524P(SLP2510P8))?

The median is 72 × 84.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the NA(RCLAMP0524P(SLP2510P8))?

By GitHub stars, ESP32-P4-PC Rev B by OLIMEX, with 33 stars.

Can I simulate one of these boards using the NA(RCLAMP0524P(SLP2510P8)) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part