5 open source boards using the AXP803(QFN68_8x8mm)

Real designs built with the AXP803(QFN68_8x8mm), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The AXP803(QFN68_8x8mm) in open source designs

The gallery holds 5 open source boards using the AXP803(QFN68_8x8mm) from 4 GitHub repositories; a typical one measures about 98.5 × 75.8 mm and carries around 412 components.

100% use four copper layers or more, and 60% carry an open source license.

The most starred is TERES PCB1-A64-MAIN Rev.C by OLIMEX.

Microcontrollers on boards using the AXP803(QFN68_8x8mm)

What boards using the AXP803(QFN68_8x8mm) are built for

AXP803(QFN68_8x8mm): common questions

Where can I find a AXP803(QFN68_8x8mm) reference design?

Each of the 5 boards on this page is a real design using the AXP803(QFN68_8x8mm). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AXP803(QFN68_8x8mm)?

The MT3608(SOT23-6), SY6280AAC(SOT23-5), AllWinner-A64(FBGA396), KSZ9031RNXCC(QFN48_1DRILL(PADPITCH-0.5MM)) and NA(RCLAMP0524P(SLP2510P8)) appear in the most repositories here.

Which microcontrollers do boards using the AXP803(QFN68_8x8mm) use?

Most are built on STM32 (1).

How big is a typical board using the AXP803(QFN68_8x8mm)?

The median is 98.5 × 75.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the AXP803(QFN68_8x8mm)?

By GitHub stars, TERES PCB1-A64-MAIN Rev.C by OLIMEX, with 572 stars.

Can I simulate one of these boards using the AXP803(QFN68_8x8mm) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part