7 open source boards using the L78L12_SOT89

Real designs built with the L78L12_SOT89, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the L78L12_SOT89

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the L78L12_SOT89 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 12V on 7 of 7 designs.
  • The IN pin is tied to 15V on 5 of 7 designs (a signal on 2).
OUTpin 1Connected to: 12V 100%
GNDpin 2Connected to: GND 100%
INpin 3Connected to: 15V 71% · a signal 29%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Current Controller by xecus, TPA3255PBTL by EliMattingly22, Ksoloti gills cv expander by ksoloti and Room hub by lucanastasio.

The L78L12_SOT89 in open source designs

The gallery holds 7 open source boards using the L78L12_SOT89 from 7 GitHub repositories; a typical one measures about 140 × 90 mm and carries around 85 components.

86% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Current Controller by xecus.

Parts used alongside the L78L12_SOT89

Microcontrollers on boards using the L78L12_SOT89

What boards using the L78L12_SOT89 are built for

L78L12_SOT89: common questions

Where can I find a L78L12_SOT89 reference design?

Each of the 7 boards on this page is a real design using the L78L12_SOT89. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the L78L12_SOT89 OUT pin connected?

The OUT pin is tied to 12V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the L78L12_SOT89.

How is the L78L12_SOT89 IN pin connected?

The IN pin is tied to 15V on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the L78L12_SOT89.

Which microcontrollers do boards using the L78L12_SOT89 use?

Most are built on AVR/Arduino (1), ESP32 (1) and STM32 (1).

How big is a typical board using the L78L12_SOT89?

The median is 140 × 90 mm, and 86% are two-layer designs.

What is the most popular open source board using the L78L12_SOT89?

By GitHub stars, Current Controller by xecus, with 48 stars.

Can I simulate one of these boards using the L78L12_SOT89 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part