5 open source boards using the L78L33_SO8

Real designs built with the L78L33_SO8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the L78L33_SO8

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the L78L33_SO8 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 3.3V on 4 of 5 designs.
  • The IN pin is tied to 12V on 3 of 5 designs (a signal on 2).
OUTpin 1Connected to: 3.3V 80% · a signal 20%
GNDpin 2, 3, 6, 7Connected to: GND 80% · a signal 20%
NCpin 4, 5Connected to: Not connected 100%
INpin 8Connected to: 12V 60% · a signal 40%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TPA3255PBTL by EliMattingly22, DataProcessingUnit by RobertGawron, LV Sensor by Gregification and Kicad 7 cli doc gen by JordanAceto.

The L78L33_SO8 in open source designs

The gallery holds 5 open source boards using the L78L33_SO8 from 5 GitHub repositories; a typical one measures about 79.8 × 55 mm and carries around 68 components.

60% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is TPA3255PBTL by EliMattingly22.

Microcontrollers on boards using the L78L33_SO8

L78L33_SO8: common questions

Where can I find a L78L33_SO8 reference design?

Each of the 5 boards on this page is a real design using the L78L33_SO8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the L78L33_SO8 OUT pin connected?

The OUT pin is tied to 3.3V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the L78L33_SO8.

How is the L78L33_SO8 IN pin connected?

The IN pin is tied to 12V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the L78L33_SO8.

Which microcontrollers do boards using the L78L33_SO8 use?

Most are built on Silicon Labs (1) and STM32 (1).

How big is a typical board using the L78L33_SO8?

The median is 79.8 × 55 mm, and 60% are two-layer designs.

What is the most popular open source board using the L78L33_SO8?

By GitHub stars, TPA3255PBTL by EliMattingly22, with 13 stars.

Can I simulate one of these boards using the L78L33_SO8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part