5 open source boards using the L78L33ACZ

Real designs built with the L78L33ACZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the L78L33ACZ

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the L78L33ACZ connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF.
  • The VIN pin has a decoupling capacitor on 3 of 5 designs, most often 330 nF (then 10 µF).
VOUTpin 1Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 60% · 100 nF (3)
GNDpin 2Connected to: GND 80% · a signal 20%
VINpin 3Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 60% · 330 nF (2), 10 µF (1)
  • Capacitor on 40% · 330 nF (1), 220 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Awreflow3 by kelogs, LEC by MSTRocketDesignTeam, Dell alienware psu spoofer by ttfsapps and Gate controller by eranknafo2001.

The L78L33ACZ in open source designs

The gallery holds 5 open source boards using the L78L33ACZ from 5 GitHub repositories; a typical one measures about 100 × 77.2 mm and carries around 49 components.

60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is LEC by MSTRocketDesignTeam.

Parts used alongside the L78L33ACZ

Microcontrollers on boards using the L78L33ACZ

What boards using the L78L33ACZ are built for

L78L33ACZ: common questions

Where can I find a L78L33ACZ reference design?

Each of the 5 boards on this page is a real design using the L78L33ACZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the L78L33ACZ VOUT pin?

The VOUT pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the L78L33ACZ.

What decoupling capacitors do designs use on the L78L33ACZ VIN pin?

The VIN pin has a decoupling capacitor on 3 of 5 designs, most often 330 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the L78L33ACZ.

Which microcontrollers do boards using the L78L33ACZ use?

Most are built on AVR/Arduino (2), ESP8266 (1) and RP2040/RP2350 (1).

How big is a typical board using the L78L33ACZ?

The median is 100 × 77.2 mm, and 60% are two-layer designs.

What is the most popular open source board using the L78L33ACZ?

By GitHub stars, LEC by MSTRocketDesignTeam, with 2 stars.

Can I simulate one of these boards using the L78L33ACZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part