5 open source boards using the LAN8742A-CZ

Real designs built with the LAN8742A-CZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LAN8742A-CZ

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LAN8742A-CZ connects to, and the resistors, capacitors and other passives placed on it.

  • The RBIAS pin has a resistor to GND on 5 of 5 designs, most often 12.1 kΩ.
  • The VDD2A pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
  • The LED2/INTSEL pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ.
  • The XTAL2 pin has a crystal on 4 of 5 designs, most often 25 MHz.
VDD2Apin 1Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (5), 10 µF (2), 22 nF (1)
  • Inductor on 40%
LED2/INTSELpin 2Connected to: A connector 40%
  • Resistor to GND on 80% · 10 kΩ (4)
  • Series resistor on 60% · 220 Ω (2), 1 kΩ (1)
LED1/REGOFFpin 3Connected to: A connector 60%
  • Series resistor on 40% · 1 kΩ (1), 220 Ω (1)
XTAL2pin 4Connected to: Signal 80% · not connected 20%
  • Crystal on 80% · 25 MHz (3)
  • Capacitor to GND on 80% · 18 pF (2), 10 pF (1), 12 pF (1)
XTAL1/CLKINpin 5Connected to: Signal 100%
  • Crystal on 80% · 25 MHz (3)
  • Capacitor to GND on 80% · 18 pF (2), 10 pF (1), 12 pF (1)
VDDCRpin 6Connected to: Signal 60% · VDDCR 40%
  • Capacitor to GND on 80% · 470 pF (2), 1 µF (2), 100 nF (1)
RXD1/MODE1pin 7Connected to: Signal 100%
  • Series resistor on 80% · 33 Ω (3), 10 kΩ (1)
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
RXD0/MODE0pin 8Connected to: Signal 100%
  • Series resistor on 80% · 33 Ω (3), 10 kΩ (1)
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
VDDIOpin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (3), 10 µF (1)
RXER/PHYAD0pin 10Connected to: Signal 80% · not connected 20%
  • Resistor to GND on 80% · 10 kΩ (4)
CRS_DV/MODE2pin 11Connected to: Signal 100%
  • Series resistor on 80% · 33 Ω (3), 10 kΩ (1)
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
MDIOpin 12Connected to: The microcontroller 100%
  • Pull-up to 3.3V on 80% · 1.5 kΩ (3), 1.6 kΩ (1)
INT/REFCLKOpin 14Connected to: Signal 100%
  • Series resistor on 80% · 33 Ω (2), 10 kΩ (1), 0 Ω (1)
  • Pull-up to 3.3V on 60% · 10 kΩ (2), 1.5 kΩ (1)
VDD1Apin 19Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (6), 10 µF (3), 22 nF (1)
TXNpin 20Connected to: A connector 60%
  • Series resistor on 60% · 49.9 Ω (2), 33 Ω (1)
  • Pull-up to 3.3V on 60% · 49.9 Ω (1), 100 Ω (1), 50 Ω (1)
TXPpin 21Connected to: A connector 60%
  • Series resistor on 60% · 49.9 Ω (2), 33 Ω (1)
  • Pull-up to 3.3V on 60% · 49.9 Ω (1), 100 Ω (1), 50 Ω (1)
RXNpin 22Connected to: A connector 60%
  • Series resistor on 60% · 49.9 Ω (2), 33 Ω (1)
  • Pull-up to 3.3V on 60% · 49.9 Ω (1), 100 Ω (1), 50 Ω (1)
RXPpin 23Connected to: A connector 60%
  • Series resistor on 60% · 49.9 Ω (2), 33 Ω (1)
  • Pull-up to 3.3V on 60% · 49.9 Ω (1), 100 Ω (1), 50 Ω (1)
RBIASpin 24Connected to: Signal 100%
  • Resistor to GND on 100% · 12.1 kΩ (5)
VSSpin 25Connected to: GND 100%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include H730duino by martinribelotta, Stm32mp135 test board by js216, Atc roip gateway by ajisrawi and Kirdy by sinara-hw.

The LAN8742A-CZ in open source designs

The gallery holds 5 open source boards using the LAN8742A-CZ from 5 GitHub repositories; a typical one measures about 125 × 100 mm and carries around 193 components.

100% use four copper layers or more, and 40% carry an open source license.

The most starred is H730duino by martinribelotta.

Parts used alongside the LAN8742A-CZ

Microcontrollers on boards using the LAN8742A-CZ

LAN8742A-CZ: common questions

Where can I find a LAN8742A-CZ reference design?

Each of the 5 boards on this page is a real design using the LAN8742A-CZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LAN8742A-CZ RBIAS pin?

The RBIAS pin has a resistor to GND on 5 of 5 designs, most often 12.1 kΩ. Counted from the KiCad layouts of 5 open source designs using the LAN8742A-CZ.

What decoupling capacitors do designs use on the LAN8742A-CZ VDD2A pin?

The VDD2A pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the LAN8742A-CZ.

What resistor goes on the LAN8742A-CZ LED2/INTSEL pin?

The LED2/INTSEL pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the LAN8742A-CZ.

Which microcontrollers do boards using the LAN8742A-CZ use?

Most are built on STM32 (5).

How big is a typical board using the LAN8742A-CZ?

The median is 125 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the LAN8742A-CZ?

By GitHub stars, H730duino by martinribelotta, with 47 stars.

Can I simulate one of these boards using the LAN8742A-CZ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part