2 open source boards using the LBCA2HNZYZ-711

Real designs built with the LBCA2HNZYZ-711, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LBCA2HNZYZ-711 in open source designs

The gallery holds 2 open source boards using the LBCA2HNZYZ-711 from 2 GitHub repositories; a typical one measures about 16.8 × 18.4 mm and carries around 59 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Enye mini versión A by INTI-CMNB.

Parts used alongside the LBCA2HNZYZ-711

Microcontrollers on boards using the LBCA2HNZYZ-711

LBCA2HNZYZ-711: common questions

Where can I find a LBCA2HNZYZ-711 reference design?

Each of the 2 boards on this page is a real design using the LBCA2HNZYZ-711. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LBCA2HNZYZ-711?

The MCP73831, MKL03Z32CAF4R, MPU-9250, TPS2115A and TPS82740B appear in the most repositories here.

Which microcontrollers do boards using the LBCA2HNZYZ-711 use?

Most are built on NXP (2).

How big is a typical board using the LBCA2HNZYZ-711?

The median is 16.8 × 18.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the LBCA2HNZYZ-711?

By GitHub stars, Enye mini versión A by INTI-CMNB, with 26 stars.

Can I simulate one of these boards using the LBCA2HNZYZ-711 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part