4 open source boards using the LD29080DT33R

Real designs built with the LD29080DT33R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The LD29080DT33R in open source designs

The gallery holds 4 open source boards using the LD29080DT33R from 3 GitHub repositories; a typical one measures about 79 × 65.7 mm and carries around 66 components.

75% use four copper layers or more, and 75% carry an open source license.

The most starred is MOBO SMD by lkesteloot.

Microcontrollers on boards using the LD29080DT33R

LD29080DT33R: common questions

Where can I find a LD29080DT33R reference design?

Each of the 4 boards on this page is a real design using the LD29080DT33R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LD29080DT33R use?

Most are built on STM32 (3) and ESP32 (1).

How big is a typical board using the LD29080DT33R?

The median is 79 × 65.7 mm, and 25% are two-layer designs.

What is the most popular open source board using the LD29080DT33R?

By GitHub stars, MOBO SMD by lkesteloot, with 79 stars.

Can I simulate one of these boards using the LD29080DT33R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part