3 open source boards using the LDFPVR

Real designs built with the LDFPVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LDFPVR in open source designs

The gallery holds 3 open source boards using the LDFPVR from 2 GitHub repositories; a typical one measures about 84 × 25 mm and carries around 110 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is Transponder-12.0.1 by peterantypas.

Parts used alongside the LDFPVR

Microcontrollers on boards using the LDFPVR

LDFPVR: common questions

Where can I find a LDFPVR reference design?

Each of the 3 boards on this page is a real design using the LDFPVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LDFPVR?

The AP3211K, SKY13330-397LF and STM32L432KBUx appear in the most repositories here.

Which microcontrollers do boards using the LDFPVR use?

Most are built on STM32 (3).

How big is a typical board using the LDFPVR?

The median is 84 × 25 mm, and 0% are two-layer designs.

What is the most popular open source board using the LDFPVR?

By GitHub stars, Transponder-12.0.1 by peterantypas, with 446 stars.

Can I simulate one of these boards using the LDFPVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part