3 open source boards using the LF398
Real designs built with the LF398, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
ATE-PCB-DESIGN
muhin19
147 × 78.5 mm110 parts2LNo license0Snh
xdylanm
39 × 100 mm54 parts2LMIT0Sample and Hold SMD Main
mzuelch
38.1 × 101.6 mm41 parts2LMIT166
The LF398 in open source designs
The gallery holds 3 open source boards using the LF398 from 3 GitHub repositories; a typical one measures about 39 × 100 mm and carries around 54 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Sample and Hold SMD Main by mzuelch.
Microcontrollers on boards using the LF398
What boards using the LF398 are built for
LF398: common questions
Where can I find a LF398 reference design?
Each of the 3 boards on this page is a real design using the LF398. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LF398 use?
Most are built on PIC (1).
How big is a typical board using the LF398?
The median is 39 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the LF398?
By GitHub stars, Sample and Hold SMD Main by mzuelch, with 166 stars.
Can I simulate one of these boards using the LF398 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.