2 open source boards using the LM1117S-5
Real designs built with the LM1117S-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LockLoop
rmingon
37 × 49 mm34 parts2LCERN-OHL-P-2.03AVR/Arduino
Servo controller
rmingon
49 × 37 mm29 parts2LNo license0
The LM1117S-5 in open source designs
The gallery holds 2 open source boards using the LM1117S-5 from 2 GitHub repositories; a typical one measures about 43 × 43 mm and carries around 32 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is LockLoop by rmingon.
Parts used alongside the LM1117S-5
Microcontrollers on boards using the LM1117S-5
What boards using the LM1117S-5 are built for
LM1117S-5: common questions
Where can I find a LM1117S-5 reference design?
Each of the 2 boards on this page is a real design using the LM1117S-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM1117S-5 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the LM1117S-5?
The median is 43 × 43 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM1117S-5?
By GitHub stars, LockLoop by rmingon, with 3 stars.
Can I simulate one of these boards using the LM1117S-5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.