5 open source boards using the LM337_TO252

Real designs built with the LM337_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The LM337_TO252 in open source designs

The gallery holds 5 open source boards using the LM337_TO252 from 4 GitHub repositories; a typical one measures about 94 × 89.3 mm and carries around 199 components.

60% use four copper layers or more, and 0% carry an open source license.

The most starred is Axiom Micro Mainboard by anuejn.

Parts used alongside the LM337_TO252

Microcontrollers on boards using the LM337_TO252

What boards using the LM337_TO252 are built for

LM337_TO252: common questions

Where can I find a LM337_TO252 reference design?

Each of the 5 boards on this page is a real design using the LM337_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM337_TO252 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the LM337_TO252?

The median is 94 × 89.3 mm, and 40% are two-layer designs.

What is the most popular open source board using the LM337_TO252?

By GitHub stars, Axiom Micro Mainboard by anuejn, with 38 stars.

Can I simulate one of these boards using the LM337_TO252 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part