2 open source boards using the LM358BAIDR

Real designs built with the LM358BAIDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The LM358BAIDR in open source designs

The gallery holds 2 open source boards using the LM358BAIDR from 2 GitHub repositories; a typical one measures about 74.7 × 49.5 mm and carries around 53 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Readout 64x64 regulated by tactilearena.

Microcontrollers on boards using the LM358BAIDR

What boards using the LM358BAIDR are built for

LM358BAIDR: common questions

Where can I find a LM358BAIDR reference design?

Each of the 2 boards on this page is a real design using the LM358BAIDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the LM358BAIDR use?

Most are built on ESP32 (1) and NXP (1).

How big is a typical board using the LM358BAIDR?

The median is 74.7 × 49.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the LM358BAIDR?

By GitHub stars, Readout 64x64 regulated by tactilearena, with 1 stars.

Can I simulate one of these boards using the LM358BAIDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part