4 open source boards using the LM3880MFX-1AA/NOPB
Real designs built with the LM3880MFX-1AA/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 157 parts
Sodimm ddr5-tester
antmicro
157 partsApache-2.035 - schematic only · 125 parts
Udimm ddr5 tester
HimaSava
125 partsApache-2.01 FPGA
Cm
mikegoelzer
55 × 40 mm101 parts8LCustom license0AVR/Arduino
Motherboard
ParadigmHyperloop
196.4 × 195.1 mm262 parts2LCustom license11
The LM3880MFX-1AA/NOPB in open source designs
The gallery holds 4 open source boards using the LM3880MFX-1AA/NOPB from 4 GitHub repositories; a typical one measures about 125.7 × 117.5 mm and carries around 141 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Sodimm ddr5-tester by antmicro.
Parts used alongside the LM3880MFX-1AA/NOPB
Microcontrollers on boards using the LM3880MFX-1AA/NOPB
What boards using the LM3880MFX-1AA/NOPB are built for
LM3880MFX-1AA/NOPB: common questions
Where can I find a LM3880MFX-1AA/NOPB reference design?
Each of the 4 boards on this page is a real design using the LM3880MFX-1AA/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM3880MFX-1AA/NOPB?
The LTC4412IS6#TRMPBF, MAX16150AUT+T, MAX812REUS+T, MCP4726A0T-E/MAY and MP8869SGL-P appear in the most repositories here.
Which microcontrollers do boards using the LM3880MFX-1AA/NOPB use?
Most are built on AVR/Arduino (1) and FPGA (1).
How big is a typical board using the LM3880MFX-1AA/NOPB?
The median is 125.7 × 117.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the LM3880MFX-1AA/NOPB?
By GitHub stars, Sodimm ddr5-tester by antmicro, with 35 stars.
Can I simulate one of these boards using the LM3880MFX-1AA/NOPB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.